Quartz stone washing agent is widely used in stone cleaning, especially granite. What is the method of quartz stone washing agent? Quartz Stone Cleaner 1. The ore is processed into a stone with a diameter of 1~3cm and removed for cleaning; then the quartz ore is soaked in the appropriate position of the pool, and the cleaning agent is put into the pool filled with the quartz ore until the surface is just soaked. After soaking for 4 to 5 hours, take out the cleaned quartz ore, or discharge the cleaning agent into another cleaning pool for storage. After cleaning, the quartz ore is fully rinsed for 10 to 30 minutes, and the product is packaged after drying.

When choosing automatic stone adding roller equipment to assist cleaning, the equipment can automatically add additives or add a certain amount of agent on time. With this method of cleaning, the fixed cleaning time is about 30 minutes from the end of the stone to the end of the stone. Depending on the severity of the quartz mine fouling, reduce or extend the cleaning time based on field experience. Then quartz mine for 10~30 minutes, dry and pack.

stone washing agent Surface treatment has the advantages of no impurities, no correction angle, high density, whitening, removal of yellow skin, removal of black spots, quartz sand detergent, removal of mica, etc. If sulfuric acid is used to remove rust, the reaction between sulfuric acid and iron oxide will produce ferric sulfate, which can be dissolved in water, so it can remove rust. However, the corrosion of inorganic acid cleaning deserves high attention, especially for carbonate stones such as marble, the acid or acid radicals remaining in the micropores may damage the stone for a long time, and it is difficult to avoid corrosion even if the buffer is involved. Therefore, foreign countries tend to clean organic acids or other organic substances that are less corrosive and easy to purify.