Quartz stone washing agent is widely used in stone cleaning, especially granite. So what are the methods of quartz stone washing agent?

1.Process the quarry stone into a stone with a diameter of 1~3cm and remove it for cleaning; after that, soak the quartz ore in the appropriate position of the pool, and put the cleaning agent into the pool filled with the quartz ore until it is just soaked on the surface. After soaking for 4 to 5 hours, pick up the cleaned quartz ore, or drain the cleaning agent to another cleaning pool for storage. The cleaned quartz ore is fully rinsed for 10 to 30 minutes, and the product is packaged after drying.

2.When choosing automatic stone adding roller equipment for auxiliary cleaning, automatic additives can be installed or a certain amount of additives can be added on time. With this method, the fixed cleaning time is about 30 minutes from the end of the stone to the end of the stone. Depending on the severity of the quartz mine fouling, reduce or extend the cleaning time based on field experience. Then quartz mine for 10~30 minutes, dry and pack.

Quartz stone washing agent is a compound reagent developed by our company for the real mineral quartz and non-metallic minerals in different regions of the earth, which can replace hydrochloric acid and sulfuric acid and overturn the traditional pickling.